LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Intrigue GL, 3.5 H >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Anti-Lock Brake System - TCS-ETS - DELPHI DBC 7) >> Diagnosis & Testing >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 1999 Buick Regal and 1999 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When using scan tool for diagnostics, ABS/TCS-ETS system is disabled by EBCM/EBTCM. ANTI-LOCK indicator will illuminate indicating only normal power assist braking is available. After diagnostics have been completed, disconnect scan tool from Data Link Connector (DLC) and turn ignition off for a least 10 seconds before road testing. This procedure is done to reset EBCM/EBTCM.
  1. Connect scan tool to Data Link Connector (DLC) located under left side of instrument panel. Follow scan tool manufacturer's instructions to retrieve stored fault codes.
  2. If multiple codes are displayed, begin diagnosis with code that is displayed first. Diagnose all codes in the order displayed by scan tool.
scientia non olet · About LEMON Manuals