Pre-Diagnostic Inspection
WARNING: This page is about a different car, the 1999 Buick Regal and 1999 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
When checking potential ABS/TCS-ETS faults, check following before performing diagnostic trouble code testing:
- Check all fuses related to ABS/TCS-ETS operation.
- Check all ABS/TCS-ETS wiring harness connectors for proper engagement, loose wires or terminals and/or corrosion. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing.
- Ensure parking brake switch is functioning properly.
- Ensure brake switch is properly adjusted.
- Check brake system for leaks and proper fluid level.
- Check ABS/TCS-ETS ground circuit for clean tight connections.
- Always perform diagnostic system check before diagnosing DTCs. See DIAGNOSTIC SYSTEM CHECK .