LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Cutlass GL, 3.1 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Wheel Alignment Specifications & Adjustment Procedures) >> Jack & Hoist >> Floor Jack

Floor Jack

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

When supporting vehicle using floor jack, place support at suspension lift points or frame lift points. Floor jacks may be placed under front crossmember on most models. See Figure .