LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Intrigue GLS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Rotors >> Removal & Installation

Removal & Installation

  1. Raise and suitably support the vehicle.
  2. Remove the tire and the wheel.
  3. Remove the brake calipers. See BRAKE CALIPERS . Remove the caliper bracket. See BRAKE CALIPER BRACKETS .
  4. Remove the brake rotor.
  5. Clean the metal contact surfaces between the brake rotor and the hub bearing flange.
  6. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals