LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Intrigue Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Disconnect brake lines from master cylinder.
  2. Disconnect fluid level sensor electrical connector.
  3. Remove master cylinder mounting nuts.
  4. Remove the master cylinder.
  5. Drain the master cylinder reservoir of all brake fluid.
  6. Remove the master cylinder reservoir. Refer to MASTER CYLINDER RESERVOIR .
scientia non olet · About LEMON Manuals