LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Eighty-Eight Base >> Repair and Diagnosis >> Drivelines & Axles >> AXLE SHAFTS - FRONT WHEEL DRIVE - "C", "G" & "H" Bodies >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Hub Nut 107 (145)
Ball Joint-To-Steering Knuckle Nut (1)
Brake Caliper Bolts 63 (85)
CV Boot Clamp
Large Boot Clamp 130 (176)
Small Boot Clamp 130 (176)
Hub Retaining Bolts 70 (95)
Stabilizer Shaft Link Nut 13 (17)
Wheel Lug Nut 100 (136)
(1) Tighten to 89 INCH lbs. (10 N.m), then turn nut additional 120 degrees (2 flats). Minimum torque of 41 ft. lbs. (56 N.m) must be obtained. To align cotter pin slot, tighten nut up to one more flat.