LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Cutlass GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Anti-Lock Brake System) >> Symptom Diagnostic Tests >> Test C: Scan Tool Displays Undefined DTCS

Test C: Scan Tool Displays Undefined DTCS

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform diagnostic system check. See DIAGNOSTIC SYSTEM CHECK  . After performing diagnostic system check, go to next step.
  2. Turn ignition off. Install scan tool. Turn ignition on. Using scan tool, clear any ABS DTCs. Turn ignition off. Turn ignition on. If undefined DTC(s) reset, go to next step. If undefined DTC(s) does not reset, go to step 4).
  3. Replace EBCM. After repairs, perform DIAGNOSTIC SYSTEM CHECK  .
  4. Malfunction is not currently present.
scientia non olet · About LEMON Manuals