LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Cutlass GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Anti-Lock Brake System) >> Diagnostic Trouble Codes (DTCS) >> DTC C1293: DTC C1291 Or C1292 Set In Current Or Previous Ignition Cycle

DTC C1293: DTC C1291 Or C1292 Set In Current Or Previous Ignition Cycle

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform diagnostic system check. See DIAGNOSTIC SYSTEM CHECK  . After performing diagnostic system check, go to next step.
  2. Install scan tool. Using scan tool, display DTCs. If DTC C1291 or C1292 is set as current or history, go to DTC C1291 or C1292. If DTCs C1291 or C1292 are not set as current or history, go to next step.
  3. Using scan tool, select DTC HISTORY. Verify frequency of malfunction. Using scan tool, clear DTCs. After repairs, perform DIAGNOSTIC SYSTEM CHECK  . If DTC C1293 does not clear, go to next step.
  4. Replace EBCM/EBTCM. After repairs, perform DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals