LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1996 >> Eighty-Eight Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Right Front Door Ajar Input Test >> Door Ajar Indicator Inaccurate

Door Ajar Indicator Inaccurate

  1. Disconnect right front door lock assembly electrical connector. Turn ignition switch to RUN position. Using a voltmeter, measure voltage between harness connector terminal "C" (Black/White wire) and ground. If battery voltage is present, go to next step. If battery voltage is not present, check Black/White wire for an open or short to ground. If wire is okay, replace IPC.
  2. Measure voltage between harness connector terminals "C" (Black/White wire) and "A" (Black wire). If battery voltage is not present, check Black wire for an open circuit. If battery voltage is present, check right front door lock assembly switch and connectors. Replace as necessary.
scientia non olet · About LEMON Manuals