LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1992 >> Toronado Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> High Beam Indicator Test

High Beam Indicator Test

  1. Ensure high beam headlights operate correctly. If high beams do not operate correctly, high beam diagnosis is necessary. If high beams operate correctly, go to next step.
  2. Remove IPC, and disconnect cluster connector. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. Turn high beam headlights on, and measure voltage between cluster connector terminal C6 (Light Green wire) and ground.
  3. If battery voltage is present, check terminal connections. If battery voltage is not present, check Light Green wire for an open circuit.
scientia non olet · About LEMON Manuals