IPC Inputs

INPUT? test types are displayed in numerical order. See IPC INPUT TEST TYPES table. DIC will then display voltage level (HI or LO) of selected input to system. In addition, DIC will display an "O" or an "X". An "O" indicates input has not cycled. An "X" indicates input has cycled since test was selected. Indicator is reset by selecting a new test, and then returning to present test.

IPC INPUT TEST TYPES

Input Number

Input

II05

⁽¹⁾ English/Metric Switch

II06

⁽¹⁾ System Monitor Switch

II07

⁽¹⁾ Trip/Odometer Switch

II08

Fuel Expand Switch

II09

Tachometer Switch

II10

⁽¹⁾ Trip Reset Switch

⁽¹⁾	Vehicles with CRT/DID only.