Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All		2.2		B
Front,Both Sides		1.0		B
Rear,Both Sides		1.4		B
Combination Procedure: AXLE SEAL: Replace:
Both,Rear		0.8		B
One Side,Rear		0.6		B
Combination Procedure: BRAKE CALIPER MOUNTING BORE: Hone cylinders or internal bores:
Each		0.2		B
Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed System.
Each Additional		0.2		B
One,w/ABS		0.5		B
One,w/o ABS		0.3		B
Combination Procedure: CALIPER: Overhaul: Includes: Bleed System.
One,w/ABS		0.7		B
One,w/o ABS		0.5		B
Combination Procedure: CALIPER: Replace: Includes: Bleed System.
One,w/ABS		0.5		B
One,w/o ABS		0.3		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: WHEEL CYLINDER: Overhaul: Includes: Bleed System.
Off Vehicle,One,w/ABS		0.7		B
Off Vehicle,One,w/o ABS		0.5		B
On Vehicle,One,w/ABS		0.5		B
On Vehicle,One,w/o ABS		0.3		B
Combination Procedure: WHEEL CYLINDER: Replace: Includes: Bleed System.
One,w/ABS		0.5		B
One,w/o ABS		0.3		B