LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1988 >> Custom Cruiser >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum (RWD) >> Removal & Installation >> Brake Booster >> Removal

Brake Booster: Removal

  1. Without disconnecting hydraulic lines, remove master cylinder from power unit and position to one side. On Delco-Moraine models equipped with pipe distribution and switch mounting bolt, remove bolt before moving master cylinder away from power unit.
    CAUTION: Do not bend or kink hydraulic lines.
  2. Disconnect vacuum hose from check valve on front of power unit. Disconnect push rod from brake pedal.
    CAUTION: Do not force push rod to the side when disconnecting.
  3. Remove nuts mounting power unit to firewall and remove power unit.
scientia non olet · About LEMON Manuals