Final Evaluations
- Depressurize accumulator with ignition off by applying and releasing brake pedal a minimum of 10 times using approximately 50 lbs. (22.7 kg.) of force on pedal. Remove Test Gauge Adapter (J-35126). Reinstall pressure switch and electrical connector and reservoir cover.
- With Powermaster functioning normally, apply brake pedal and note pedal travel. Pedal should not creep at steady pressure. Brake warning light should not indicate pressure differential between pressure circuits.
- Observe running motor and pump sound from driver's seat. Consult diagnostic symptom chart for conditions and performance values which differ from normal.