Removal & Installation (All Models)
- Disconnect negative battery cable. On 88 and 98, remove steering column (center) trim cover. On Calais, remove steering column collar, steering column opening filler and cluster trim cover.
- On Ciera, remove steering column collar and accessory trim cover. On Cutlass, remove cluster pad assembly. On Firenza and Toronado, remove left hand trim cover.
- On all models, remove mount screw(s) attaching headlight switch to cluster carrier or instrument panel. Remove wiring connector(s) or fiber optic lead, then pull switch rearward to remove from panel. See Fig 1 . To install headlight switch, reverse removal procedure.