Removal (Toronado)
- Remove left trim cover, telltale lens and housing and odometer knob. Remove 2 screws, cluster lens and faceplate. Disconnect shift indicator cable end at pointer. Remove 3 screws attaching speedometer to cluster housing.
- Remove 2 screws attaching upper gauge assemblies to cluster housing. Pull assemblies rearward to remove. Remove 2 screws attaching lower cluster housing to cluster carrier. Disconnect speedometer cable at transmission, or at transducer on cruise control equipped vehicles.
- Pull cluster housing out far enough to reach behind and disconnect speedometer cable from clip. Remove speed sensor attaching screw and remove speed sensor, if equipped. Remove cluster housing and speedometer assembly. Remove 2 screws attaching cluster to speedometer and separate assemblies.
- Remove indicator lamp sockets from cluster housing by twisting them out. Remove gauge terminal clips from cluster housing. Remove printed circuit.