LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1982 >> Toronado 5.7L Eng VIN N >> Repair and Diagnosis >> Electrical >> Body Electrical >> Switches, Gauges & Instrument Panels OLDSMOBILE >> Removal & Installation >> Speedometer, Gauges & Printed Circuits >> Removal (Firenza)

Removal (Firenza)

  1. Remove right, left and steering column trim covers. Remove 7 screws attaching cluster trim cover to instrument panel and remove trim cover. Remove lens and bezel-to-cluster carrier retaining screws (5).
  2. Loosen steering column upper retaining bolts and lower column. Remove cluster housing-to-carrier retaining screws (4), pull cluster out and disconnect speedometer cable. Remove cluster housing.
  3. Remove LED/photo cell retaining screw from back of speedometer. Remove speedometer head-to-cluster housing retaining screws (2) from rear of cluster. Remove speedometer.
  4. Remove snap-in bulbs from rear of cluster. Disconnect VSS connector. Remove any nuts retaining printed circuit to cluster housing and remove printed circuit.
scientia non olet · About LEMON Manuals