"B" & "C" Body Hardtop (Exc. Cad. Fleetwood)

Remove upper portion of door trim panel and watershield. Prop window in full up position, remove center guide cam upper and lower attaching bolts. Pull guide downward to disengage from window lower sash guide plate assembly. Remove guide through access hole.
Prop glass in full up position by placing rubber door wedge stops between glass and inner panel watershield. Drive out regulator mounting rivet center pins and drill out rivets using 1/4" drill. Slide regulator lift arm roller from lower sash channel cam and remove regulator out through large access hole.
To install, reverse removal procedure using "U" nuts (Part No. 3916700) and screws to attach regulator to inner panel.