Front Cover Oil Seal: Installation

Apply suitable sealer to outside diameter of new seal. Using suitable tool (BT-6405), install oil seal to front cover. Tighten until 0.005" feeler gauge will just fit between front cover and tool.

CAMSHAFT

Engine

Journal Diam.

Clearance ⁽¹⁾

Lobe Lift

All

2.0357-2.0365" ⁽²⁾

.0020-.0058"

..........

⁽¹⁾	End play -.011-.077"

⁽²⁾	Each succeeding journal.020" smaller than preceding journal.