LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1975 >> Toronado Custom >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 260" BUICK, OLDSMOBILE & PONTIAC 350" & 455" OLDSMOBILE Exc. Omega >> Cylinder Head >> Removal

Cylinder Head: Removal

Drain cooling system and remove intake manifold. Remove exhaust manifold. Remove valve cover, rocker arm bolts, pivots, rocker arms and push rods.

NOTE: Identify pivots and rocker arms for installation to original locations.

Loosen or remove any accessory brackets which interfere. Disconnect ground strap from right cylinder head. Remove cylinder head bolts and cylinder head.

scientia non olet · About LEMON Manuals