Special Oldsmobile Procedure
Charge bleed ball as specified (use maximum allowable, without ball leaking). Bleed master cylinder first. Bleed both front units together. After opening bleed screw 3/4 turn, apply pressure with bleed ball. To ensure complete air evacuation, tap pedal 1/4-1/2" during bleeding. Repeat procedure, bleeding both rear units at same time.
NOTE:
On disc brakes, ensure combination valve is held open as described.
Pressure Bleeder Settings
| Application | Pressure (psi) |
|---|---|
| Buick & Pontiac | 35 (Max.) |
| Cadillac | 30 (Min.) |
| Chevrolet | 20-30 |
| Chrysler Corp. | Approx. 35 |
| Ford Motor Co. | 10-30 |
| Oldsmobile | 35-60 |