Pressure Tank Bleeding: Notes

PRESSURE TANK CAUTIONS:  To safeguard against air entering system, observe the following:

1. Do not shake or agitate pressure tank after air pressure has been introduced.
2. Do not move pressure tank position, but bring air line to tank when additional air pressure is required.
3. Be sure that valves on pressure tank lines are not defective and allowing air to be sucked in when fluid passes through lines.
4. Keep pressure tank at least 1/3 full of fluid at all times.
5. When pressure tank is full of air bubbles, release air pressure so bubbles can escape, then repressurize.