DTC Confirmation Procedure
- CHECK DTC PRIORITY
If DTC B20E3-96 is displayed with DTC B20D0-11 or B20D0-15, first perform the confirmation procedure (trouble diagnosis) for DTC B20D0-11 or B20D0-15.
Is applicable DTC detected?
YES
B20D0-11: Perform diagnosis of applicable. Refer to DTC Confirmation Procedure .
YES
B20D0-15: Perform diagnosis of applicable. Refer to DTC Confirmation Procedure .
NO
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Ignition switch ON.
- Turn lighting switch and wait at least 2 seconds or more.
- Select "Self Diagnostic Result" mode of "IPDM E/R".
- Check DTC.
Is DTC detected?
YES
Refer to DTC Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.