LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> Sentra SR >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Foot Pedal With Rear Disc Brakes) >> Removal And Installation >> Parking Brake Front Cable >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the center console assembly. Refer to Removal and Installation .
  2. Remove the driver seat. Refer to Removal and Installation .
  3. Remove the adjusting nut from the parking brake pedal assembly. Refer to Exploded View .
    CAUTION: Do not reuse the adjusting nut.
  4. Position the floor trim aside.
  5. Position the floor insulator aside.
  6. Remove the nuts and the bolt from the front parking brake cable. Refer to Exploded View .
  7. Pull the equalizer (A) in the rearward direction and then in the upward direction in order to separate the rear parking brake cables [LH/RH (2)] from the front parking brake cable (1).
    GNSJPFIB0129Z-129Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: To prevent damage to parts, do not bend the parking brake cables.
  8. Remove the front parking brake cable.
scientia non olet · About LEMON Manuals