LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> Sentra S >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Foot Pedal With Rear Disc Brakes) >> Removal And Installation >> Parking Brake Rear Cable >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the center console assembly. Refer to Removal and Installation .
  2. Insert a suitable tool onto the adjusting nut (A) and rotate the adjusting nut to fully loosen the cable, then release the parking brake pedal.
    GNSAWFIA0157Z-157Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse the adjusting nut if the nut is removed.
    NOTE: It is not necessary to remove the adjusting nut.
  3. Pull the equalizer (A) in the rearward direction and then in the upward direction in order to separate the rear parking brake cables [LH/RH (2)] from the front parking brake cable (1).
    GNSJPFIB0129Z-129Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: To prevent damage to parts, do not bend the parking brake cables.
  4. Remove the rear under cover (LH/RH). Refer to Removal and Installation .
  5. Reposition the exhaust heat insulator.
  6. Remove the rear parking brake cable from the underbody bracket.
  7. Separate the rear parking brake cable from the toggle lever. Refer to Exploded View .
  8. Remove the bolts from the rear parking brake cable. Refer to Exploded View .
  9. Remove the rear parking brake cable from the vehicle.
scientia non olet · About LEMON Manuals