Diagnosis Procedure

The parking, side marker, license plate and tail lamps are not turned ON in any condition.

1. COMBINATION SWITCH INSPECTION 

   Check combination switch. Refer to Symptom Table .

   Is the inspection result normal?

   YES

   GO TO 2.

   NO

   Repair or replace the malfunctioning part.

2. CHECK POSITION LIGHT REQUEST SIGNAL 

   CONSULT

   1. Select "POSITION LIGHT REQ" in "Data Monitor" mode of "IPDM E/R".
   2. With operating the lighting switch, check the monitor status.

      Monitor item	Condition		Monitor status
      POSITION LIGHT REQ	Lighting switch	1ST	On
      		OFF	Off

   Is the inspection result normal?

   YES

   Replace IPDM E/R. Refer to Removal and Installation .

   NO

   Replace BCM. Refer to Removal and Installation .