Diagnosis Procedure
- CHECK DTC
Perform each inspection according to the displayed DTC.
Which DTC are displayed?
[B20CE-11 or B20CF-11]
GO TO 2.
[B20C-15 or B20CF-15]
GO TO 3.
- CHECK HEADLAMP (HI) 1
- Ignition switch OFF.
- Disconnect front combination lamp connector.
- Check continuity of front combination lamp terminals.
Front combination lamp
Continuity
Terminals
8
1
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace the corresponding front combination lamp. Refer to Removal and Installation .
- CHECK HEADLAMP (HI) 2
- Ignition switch OFF.
- Disconnect front combination lamp connector.
- Check continuity of front combination lamp terminals.
Front combination lamp
Continuity
Terminals
8
1
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace the corresponding front combination lamp. Refer to Removal and Installation .