High And Low Reverse Clutch: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove bearing race from high and low reverse clutch drum.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove snap ring from high and low reverse clutch drum using a flat-bladed screwdriver.

Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:
- Be careful not to scratch high and low reverse clutch drum.
- Be careful not to damage snap ring.
Remove high and low reverse clutch component part (drive plates, driven plates, retaining plate, and dish plate) from high and low reverse clutch drum.