LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission (DTC/Circuit Diagnosis) (Re7R01B)) >> DTC/Circuit Diagnosis >> Shift Position Indicator Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK A/T INDICATOR 
    CAUTION: Always drive vehicle at a safe speed.
    1. Start the engine.
    2. Check the actual selector lever position ("P", "R", "N" and "D") and the indication of the shift position indicator mutually coincide.
    3. Drive vehicle in the manual mode, and then check that the actual gear position and the indication of the shift position indicator mutually coincide when the selector lever is shifted to "UP (+ side)" or "DOWN (- side)" side (1GR <=> 7GR).

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Go to Diagnosis Procedure .

scientia non olet · About LEMON Manuals