DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P0717	INPUT SPEED SENSOR A (Input/Turbine speed sensor "A" Circuit No Signal)	Diagnosis condition	When all of the following conditions are satisfied: Selector lever: D Gear position: 2nd, 3rd, 4th, 5th or 6th At no gear change Idle switch signal: OFF (Engine is not idling) Vehicle speed: More than 40 km/h (25 MPH)
		Signal	Input speed sensor signal
		Threshold	The revolution of input speed sensor 1: Less than 270 rpm
		Diagnosis delay time	Maintained for 5 seconds or more