DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
U1024 |
VVEL CAN COMM CIRCUIT (VVEL CAN communication) |
1 |
Diagnosis condition |
Ignition switch ON |
|
Signal (terminal) |
CAN communication signal |
|||
|
Threshold |
VVEL control module cannot transmitting or receiving CAN communication signal |
|||
|
Diagnosis delay time |
2 seconds or more |
|||
|
2 |
Diagnosis condition |
Ignition switch ON |
||
|
Signal (terminal) |
CAN communication signal |
|||
|
Threshold |
Detecting error during the initial diagnosis of CAN controller of VVEL control module |
|||
|
Diagnosis delay time |
-- |
|||