LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System (DTC/Circuit Diagnosis) (5.6L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0088: FRP Control System >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC PRIORITY 

    If DTC P0088 is displayed with DTC P0090, first perform the trouble diagnosis for DTC P0090.

    Is applicable DTC detected?

    YES

    Perform the diagnosis of the applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. CHECK LOW FUEL PRESSURE 

    Check low fuel pressure. Refer to Work Procedure .

    Is inspection result normal?

    YES

    GO TO 3.

    NO

    Check low fuel pressure system. Refer to Diagnosis Procedure .

  3. CHECK HIGH PRESSURE FUEL PUMP 

    Check high pressure fuel pump. Refer to Component Inspection (High Pressure Fuel Pump) .

    Is inspection result normal?

    YES

    GO TO 4.

    NO

    Replace error-detected parts.

  4. CHECK FUEL LEAKAGE 
    1. Start the engine.
    2. Visually check that the fuel pump, fuel rail, and fuel piping have no fuel leakage.

    Is inspection result normal?

    YES

    Check that the fuel system has no breakage, bend, and crush. Refer to Inspection .

    NO

    Replace or replace the error-detected parts.