LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Lubrication System (5.6L)) >> Removal And Installation >> Oil Cooler >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check engine oil and engine coolant levels and add engine oil and engine coolant. Refer to Inspection  and Inspection .
  2. Start the engine, and check for leaks of engine oil or engine coolant.
  3. Stop the engine and wait for 10 minutes.
  4. Check the engine oil level and engine coolant level again. Refer to Inspection  and Inspection .
scientia non olet · About LEMON Manuals