LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (DTC/Circuit Diagnosis) (5.6L) (6 Of 6)) >> DTC/Circuit Diagnosis >> Information Display (ASCD) >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK INFORMATION DISPLAY 
    1. Start engine.
    2. Press MAIN switch on ASCD steering switch.
    3. Drive the vehicle at more than 40 km/h (25 MPH).
      CAUTION: Always drive vehicle at a safe speed.
    4. Press SET/COAST switch.
    5. Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Go to Diagnosis Procedure .