DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P26A6 |
ENGINE COOLANT B/V A POSI SEN (Engine coolant bypass valve A position sensor circuit low) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
||
|
Threshold |
ECM detects the following status continuously: A voltage signal transmitted from the multi-way control valve position sensor is 0.34 V or less |
||
|
Diagnosis delay time |
5 seconds or more |
||
|
P26A7 |
ENGINE COOLANT B/V A POSI SEN (Engine coolant bypass valve A position sensor circuit high) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
||
|
Threshold |
ECM detects the following status continuously: A voltage signal transmitted from the multi-way control valve position sensor is 4.76 V or more |
||
|
Diagnosis delay time |
5 seconds or more |
||