LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (DTC/Circuit Diagnosis) (5.6L) (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P2610: ECM Internal Timer >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK ECM POWER SUPPLY AND GROUND CIRCUIT 

    Check ECM power supply and ground circuit. Refer to DTC Diagnosis Procedure .

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Repair or replace error-detected parts.

  2. CHECK SELF-DIAGNOSTIC RESULT 

    Check that DTCs related to the fuel system and the cooling system are not detected.

    Is any DTC detected?

    YES

    Check the DTC. Refer to DTC Index .

    NO

    GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Erase DTC. Refer to CONSULT Function .
    2. Perform DTC Confirmation Procedure again. Refer to DTC Description .

    Is the 1st trip DTC P2610 displayed again?

    YES

    Replace ECM. Refer to Removal and Installation .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals