DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
To judge malfunctions, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal fluctuates according to fuel feedback control.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P2254 |
O2 sensor bank 2 sensor 1 (O2 sensor negative current control circuit/open bank 2 sensor 1) |
A) |
Diagnosis condition |
-- |
|
Signal (terminal) |
Air fuel ratio sensor 1 signal |
|||
|
Threshold |
The A/F signal computed by ECM from the A/F sensor 1 signal is constantly in a range other than approx. 2.2 V |
|||
|
Diagnosis delay time |
-- |
|||
|
B) |
Diagnosis condition |
-- |
||
|
Signal (terminal) |
Air fuel ratio sensor 1 signal |
|||
|
Threshold |
The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx. 2.2 V |
|||
|
Diagnosis delay time |
-- |
|||