LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (5.6L)) >> Unit Disassembly And Assembly >> How To Select Piston And Bearing >> Connecting Rod Bearing >> When Connecting Rod And Crankshaft Are Reused

When Connecting Rod And Crankshaft Are Reused

WARNING: This page is about a different variant/trim than selected.
  1. Measure connecting rod big end diameter and crankshaft pin journal diameter. Refer to Inspection .
  2. Correspond the measured dimension in connecting rod big end diameter row of "CONNECTING ROD BEARING SELECTION TABLE".
  3. Correspond the measured dimension in crankshaft pin journal diameter column of "CONNECTING ROD BEARING SELECTION TABLE".
  4. Follow from step 3 in "WHEN NEW CONNECTING ROD AND CRANKSHAFT ARE USED".
scientia non olet · About LEMON Manuals