Connecting Rod Bushing Oil Clearance
WARNING: This page is about a different variant/trim than selected.
Connecting Rod Bushing Inner Diameter
Measure the inner diameter of connecting rod bushing with a suitable tool (A).
|
Standard |
: Refer to Cylinder Block . |
Piston Pin Outer Diameter
Measure the outer diameter of piston pin with a suitable tool (A).
|
Standard |
: Refer to Cylinder Block . |
Connecting Rod Bushing Oil Clearance
(Connecting rod bushing oil clearance) = (Connecting rod bushing inner diameter) - (Piston pin outer diameter)
|
Standard and limit |
: Refer to Cylinder Block . |
- If the calculated value exceeds the limit, replace connecting rod assembly and/or piston and piston pin assembly.
- If replacing piston and piston pin assembly, refer to Description .
- If replacing connecting rod assembly, refer to Connecting Rod Bearing to select the connecting rod bearing.