Jigs For Replacement
WARNING: This page is about a different variant/trim than selected.
Check if the following Tools are prepared.
- Remover puller
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|
Tool number
|
:--(J-51269-1)
|
|
(A)
|
: Tool inner
|
|
(B)
|
: Nut
|
|
(C)
|
: Tool outer
|
|
(D)
|
: Bolt
|
|
(E)
|
: Pin gauge (6.050 mm)
|
|
(F)
|
: Suitable tool
|
- Alignment fixture
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|
Tool number
|
:--(J-51269-2)
|
|
(A)
|
: Tool base
|
|
(B)
|
: Bolt
|