LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (5.6L)) >> Removal And Installation >> Intake Manifold >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

CAUTION: Do not reuse intake manifold gaskets.

Intake Manifold 

Tighten intake manifold bolts in order as shown.

GNSJPBIA3470Z-470Courtesy of NISSAN NORTH AMERICA, INC.

Intake manifold bolts

: 11.0 N.m (1.1 kg-m, 8 ft-lb)

SYMBOL

: Engine front

Electric Throttle Control Actuator