LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (5.6L)) >> Removal And Installation >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect harness connector from ignition coil.
  2. Remove ignition coil.
    CAUTION: Do not shock ignition coil.
    NOTE: Installation position of ignition coil depends on cylinder position.
  3. Remove spark plug (if necessary).
    CAUTION: Do not shock spark plug.
scientia non olet · About LEMON Manuals