Physical Values
WARNING: This page is about a different variant/trim than selected.
|
Terminal (Wire color) |
Description |
Condition |
Value (Approx.) |
|||
|
+ |
- |
Signal name |
Input/Output |
|||
|
1 (P) |
Ground |
Ignition power supply |
Input |
Ignition switch ON |
Battery voltage |
|
|
Ignition switch OFF |
0 V |
|||||
|
2 (P) |
Ground |
Battery power supply (Memory back-up) |
Input |
Always |
Battery voltage |
|
|
3 (L) |
-- |
CAN-H |
Input/Output |
-- |
-- |
|
|
4 (O) |
-- |
K-line |
Input/Output |
-- |
-- |
|
|
5 (B) |
Ground |
Ground |
-- |
Always |
0 V |
|
|
6 (V) |
Ground |
Ignition power supply |
Input |
Ignition switch ON |
Battery voltage |
|
|
Ignition switch OFF |
0 V |
|||||
|
7 (R) |
Ground |
Back-up lamp relay |
Output |
Ignition switch ON |
Selector lever in "R" position. |
0 V |
|
Selector lever in other than above. |
Battery voltage |
|||||
|
8 (P) |
-- |
CAN-L |
Input/Output |
-- |
-- |
|
|
9 (B/R) |
Ground |
Starter relay |
Output |
Ignition switch ON |
Selector lever in "N" and "P" positions. |
Battery voltage |
|
Selector lever in other than above. |
0 V |
|||||
|
10 (B) |
Ground |
Ground |
-- |
Always |
0 V |
|