Explanation for Driving Patterns for "Misfire ", "Fuel Injection System"
WARNING: This page is about a different variant/trim than selected.
Driving Pattern B
Refer to Driving Pattern .
Driving Pattern C
Refer to Driving Pattern .
Example:
If the stored freeze frame data is as per the following:
Engine speed: 850 rpm, Calculated load value: 30%, Engine coolant temperature: 80 deg.C (176 deg.F)
To be satisfied with driving pattern C, the vehicle should run under the following conditions:
Engine speed: 475 - 1, 225 rpm, Calculated load value: 27 - 33%, Engine coolant temperature: more than 70 deg.C (158 deg.F)