LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System (DTC/Circuit Diagnosis) (5.6L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0315: Crankshaft Position >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC PRIORITY 

    If DTC P0315 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. CHECK GEAR TOOTH 

    Visually check for chipping signal plate gear tooth.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace the signal plate. Refer to Exploded View .

scientia non olet · About LEMON Manuals