LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System (DTC/Circuit Diagnosis) (5.6L) (4 Of 6)) >> DTC/Circuit Diagnosis >> DTC P100A: VVEL System >> Component Inspection (VVEL ACTUATOR HOUSING ASSEMBLY)

Component Inspection (VVEL ACTUATOR HOUSING ASSEMBLY)

WARNING: This page is about a different variant/trim than selected.
  1. CHECK VVEL ACTUATOR HOUSING ASSEMBLY 
    1. Turn ignition switch OFF.
    2. Remove VVEL actuator housing assembly. Refer to Removal and Installation .
    3. Turn the ball screw shaft to check that it works smoothly.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    GO TO 2.

  2. REPLACE VVEL ACTUATOR HOUSING ASSEMBLY 

    Replace VVEL actuator housing assembly. Refer to Removal and Installation .

    INSPECTION END