DTC Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC PRIORITY
If DTC P05EC is displayed with other DTC first perform the trouble diagnosis for other DTC.
Is applicable DTC detected?
YES
Perform diagnosis of applicable. Refer to DTC Index .
NO
GO TO 2.
- INSPECTION START
- Turn ignition switch ON.
- Erase DTC.
- Perform DTC confirmation procedure. Refer to DTC Description .
- Check 1st trip DTC.
Is the 1st trip DTC P05EC displayed again?
YES
GO TO 3.
NO
INSPECTION END
- REPLACE ECM
Replace ECM. Refer to Removal and Installation .
INSPECTION END