DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P0340	CMP SEN/CIRC-B1 [Camshaft position sensor "A" circuit bank 1]	1	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking
			Diagnosis delay time	--
		2	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not sent to ECM during engine running
			Diagnosis delay time	--
		3	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not in the normal pattern during engine running
			Diagnosis delay time	--
P0345	CMP SEN/CIRC-B1 [Camshaft position sensor "A" circuit bank 2]	1	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking
			Diagnosis delay time	--
		2	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not sent to ECM during engine running
			Diagnosis delay time	--
		3	Diagnosis condition	Start engine and let it idle
			Signal (terminal)	Camshaft position sensor signal
			Threshold	The cylinder No. signal is not in the normal pattern during engine running
			Diagnosis delay time	--