DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P2100 |
ETC MOT PWR-B1 [Throttle control motor relay circuit open (bank 1)] |
Diagnosis condition |
Start the engine and let it idle |
|
Signal (terminal) |
Throttle control motor relay signal |
||
|
Threshold |
ECM detects that the voltage of power source for throttle control motor is excessively low |
||
|
Diagnosis delay time |
-- |
||
|
P2103 |
ETC MOT PWR (Throttle control motor relay circuit short) |
Diagnosis condition |
Start the engine and let it idle |
|
Signal (terminal) |
Throttle control motor relay signal |
||
|
Threshold |
ECM detects that the throttle control motor relay is stuck ON |
||
|
Diagnosis delay time |
-- |
||