DTC Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC PRIORITY
- If DTC P1574 is displayed with DTC UXXXX first perform the trouble diagnosis for DTC UXXXX.
- If DTC P1574 is displayed with DTC P0500 first perform the trouble diagnosis for DTC P0500.
- If DTC P1574 is displayed with DTC P0605 first perform the trouble diagnosis for DTC P0605.
- If DTC P1574 is displayed with DTC P0607 first perform the trouble diagnosis for DTC P0607.
Is applicable DTC detected?
YES
Perform diagnosis of applicable. Refer to DTC Index .
NO
GO TO 2.
- CHECK DTC WITH TCM
Check DTC with TCM. Refer to CONSULT Function .
Is the inspection result normal?
YES
GO TO 3.
NO
Perform Diagnosis Procedure corresponding to the DTC indicated.
- CHECK DTC WITH "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)"
Refer to CONSULT Function (ABS) .
Is the inspection result normal?
YES
GO TO 4.
NO
Perform Diagnosis Procedure corresponding to the DTC indicated.
- CHECK DTC WITH "COMBINATION METER"
Refer to CONSULT Function (METER/MA) .
INSPECTION END